contact@tengine.com.cn
WhatsApp: +86 133 3109 8301
TEM Online Total Phosphorus Analyzer
Application Areas:
• The inlet and outlet of sewage and water treatment plants;
• Pollutant discharge outlets of various enterprises;
• Lake and river water quality monitoring stations.
Key words:
Classification:
- 产品描述
- Product Features
- Performance Index
- Field Application
-
TEM在线总磷分析仪采用国标规定的检测方法，与实验室分析具有很好的相关性，符合HJ/T103-2003中规定的各项参数，抗干扰力强，整体的运行成本低，广受客户好评。
应用领域：
• 污水厂及自来水厂的进水口、出水口；
• 各企业排污口；
• 湖泊、河流水质监测站。
-
- The method used in this instrument is well correlated with the ammonium molybdate spectrophotometry specified in the national standard GB11893-89, and has a good correlation with the laboratory analysis, and conforms to the parameters specified in HJ/T 103-2003;
- Adopt special photoelectric colorimetric method to eliminate the interference caused by color, suspended solids and turbidity;
- Low reagent usage and low operating cost of the whole machine;
- PLC control, high reliability, strong anti-interference ability, suitable for harsh industrial environment;
- Intelligent fault self-diagnosis function, which is very convenient for instrument management and maintenance;
- Power-off protection design, with automatic data recovery function for power-off and re-power-on;
- It has the function of exceeding the standard, which can be used in conjunction with the sampler to achieve the retention of the sample beyond the standard;
- With network function, data sharing and remote control can be realized through the network platform;
- Equipped with a micro printer for permanent data storage.
-
Measurement Performance
Measurement Range
0~2 mg/L; 0~10 mg/L; 0~50 mg/L; 0~200 mg/L (expandable based on customer requirements)
Accuracy
±0.02 mg/L when ≤ 0.4 mg/L;
±5% when > 0.4 mg/L.
Detection Limit
0.01 mg/L
Zero Drift
±3% FS (Full Scale)
Span Drift
±5% FS
Repeatability
±10%
Measurement Cycle
Minimum measurement cycle of 35 minutes
Reagent Consumption
0.7 milliliters per measurement per reagent
Calibration
Equipped with online automatic calibration function
Calibration Solution Verification
Equipped with automatic calibration sample verification function
Automatic Cleaning
Automatic pipeline cleaning after each measurement
Data Storage
Storage of 500,000 historical data points (over ten years of complete data records)
Data Protection
Data is not lost in the event of abnormal alarms or power failure
Display
Touchscreen display and command input
Output
Interface Output
Standard: RS232/RS485, two 4~20 mA channels;
Optional: Wireless IoT interface, linkage control interface.
Power Supply
AC Power Supply
220 ± 22 VAC, 50 ± 2.5 Hz
Instrument Power
Average daily 50 W; Peak < 300 W
Physical Performance
Dimensions
420 × 600 × 250 mm
Environmental Performance
Environmental Requirements
5~40°C, relative humidity 80% RH, no condensation
External Water Sample Connection
Pressure: -10~2 kPa.
Flow Rate: -1.0~0.5 m/s.
Temperature: 5~40°C.
Related Information
Contact us
Tengine is ready to help with quotes, technical issues, and all your questions. Simply fill out our form for a prompt response.
*Please ensure all information is accurately provided to enable us to respond to you promptly.
Tengine Innovation (Beijing) Instruments Inc.
Email: contact@tengine.com.cn
WhatsApp: +86 133 3109 8301
Address: Floor 6, Building 8, Yard 1,
Nongda South Road, Haidian District, Beijing
Copyright©2022 Tengine Innovation (Beijing) Instruments Inc.
Copyright©2022 Tengine Innovation
(Beijing) Instruments Inc.